GW INSTEK lancia il nuovo multimetro a doppia misurazione, la serie GDM-904x, che ha due modelli, GDM-9041 e GDM-9042, per sostituire la serie esistente GDM-834x . Le sue eccezionali caratteristiche includono 50000 conteggi, display LCD, accuratezza della tensione CC di base dello 0,02%, misurazione con identificazione automatica (A.I.) e un connettore di protocollo USB per fornire agli utenti precisione di misurazione, osservazione chiara dei dati, comodità di connettersi al personal computer. La serie GDM-904x non solo supporta gli elementi di misurazione fondamentali forniti dai multimetri generali, ma è anche dotata di funzioni di misurazione della capacità e della temperatura. Allo stesso tempo, la misurazione con identificazione automatica (A.I.) della serie GDM-904x può identificare automaticamente i segnali di misurazione e commutare gli elementi di misurazione prima di eseguire le misurazioni, senza che gli utenti debbano commutare manualmente. Inoltre, la serie GDM-904x fornisce anche molte funzioni matematiche per soddisfare i requisiti di misurazione per test di processo di produzione, esperimenti educativi e strutture di collaudo. Per quanto riguarda l'archiviazione e il recupero dei dati, la serie GDM-904x offre due metodi: in primo luogo, la funzione di archiviazione tramite unità flash USB, che funziona da sola senza essere collegata a un computer; in secondo luogo, l'interfaccia USB (supporta USBCDC e USBTMC) e l'interfaccia GPIB opzionale (deve essere installata in fabbrica) per consentire agli utenti del sistema di misurazione automatica di salvare e recuperare comodamente i dati.
| Brand | GW Instek |
| Model | GDM-9042/9041 |
| Max. Counts | 51000 |
| Display | Dual Display(LCD) |
| Dual Measurement | |
| Sample Rate (S/M/F) | 5 /s, 40 /s, 160 /s |
| A. I. Measurement | Yes |
| DC Voltage | |
| Range | 500 mV to 1000 V |
| Best Accuracy | 0.02%+4 |
| AC Voltage True RMS | |
| Range | 500 mV to 750 V |
| Best Accuracy | 0.35%+15(50 Hz to 10 kHz) |
| Bandwidth | 100 kHz |
| AC+DC Voltage True RMS | |
| Range | 500 mV to 750 V |
| Best Accuracy | 0.35%+25(50 Hz to 10 kHz) |
| Bandwidth | 100 kHz |
| DC Current | |
| Range | 500 μA to 10 A |
| Best Accuracy | 0.05%+4 |
| AC Current True RMS | |
| Range | 500 μA to 10 A |
| Best Accuracy | 0.5%+20(50 Hz to 2 kHz) |
| Bandwidth | 20 kHz |
| AC+DC Current True RMS | |
| Range | 500 μA to 10 A |
| Best Accuracy | 0.5%+30(50 Hz to 2 kHz) |
| Bandwidth | 20 kHz |
| Resistance (2Wire) | |
| Range | 500 Ω to 100 MΩ |
| Best Accuracy | 0.1%+3 |
| Capacitance | |
| Range | 5 nF to 50 μF |
| Best Accuracy | 2%+4 |
| Frequency | |
| Range | 10 Hz to 1 MHz |
| Best Accuracy | 0.01%+3 |
| Period | 1 μs to 100 ms |
| Others | |
| Diode Test | YES |
| Continuity Beeper | YES |
| Temp. Measurement[1] | TC (K, J, T) |
| Math | Rel, Max/Min, dBm, dB, Hold, |
| MX+B, 1/X, Ref%, Compare | |
| Graphic | N.A. |
| Memory | N.A. |
| Trigger Input | N.A. |
| USB Storage[1] | Standard |
| USB Device | Standard |
| LAN | N.A. |
| GPIB[2] | Option (factory install) |
[1] : Temperature measurement and USB storage function are only available for GDM-9042.
[2] : Optional GPIB interface is only for GDM-9042 and it must be installed in factory.
Fattori chiave
- 50000 Counts
- 4.3’ TFT Graphic LCD
- DCV Basic Accuracy:0.02%
- A. I. Measurement provides automatic identification and measurement for Voltage, Resistance, Diode and Continuity tests
- 11 Measurement Functions: DCV, ACV, DCI, ACI, 2-wire Resistance, Frequency, Period, Diode, Continuity, Capacitance and Temperature
- True RMS (AC, AC+DC) measurements
- Dual Measurement Function to Providing Two Selected Measurement Simultaneously
- Max./Min., REL, MX+B, 1/X, Ref%, Compare, Hold, dB, dBm
- Standard Interfaces: USB Device (support USBCDC & USBTMC)
- Temperature measurement function (GDM-9042 only)
- USB storage for Data collection (GDM-9042 only)
- Optional Interface: GPIB (factory install for GDM-9042 only)
Standard Accessories
Safety Instruction Sheet x 1
Power cord x 1
Test lead GTL-207A x 1
Optional
GDM-90G1 GPIB Interface
Note : Optional GPIB interface is only for GDM-9042 and it must be installed in factory.
Optional Accessories
GTL-205A Temperature probe adaptor with thermocouple (K-type), Approx. 1000 mm
GTL-246 USB Cable, A-B type, Approx. 1200 mm
GTL-248 GPIB Cable, Approx. 2000 mm
GDM-TL1 Test Lead Set
GSC-014 Soft Carrying Case for DMM Accessory
GRA-422 Rack Mount Kit (19”, 2U)
GRA-454 Rack Mount Kit (19”, 2U) for one set or two sets
GDM-9041 USB Device partno 01DM904100GS
GDM-9042 USB Storage/Device partno 01DM904200GS
GDM-9042 WITH GPIB USB Storage/Device & GPIB partno 01DM904210GS
